With most of the planning of the Vernon River layout complete, or at least on the way to completion, I felt confident that it was safe timing to get some benchwork built.
Given the likelihood of a move in the not so distant future I applied the TOMA concept and based my track plan on two 2.5ft x 6ft modules and two 6in x 5ft single track removable staging cassettes- one for each end. The fully sceniced staging cassettes will use bolts and tee nuts to securely connect them to each end of the layout.
This modular setup not only allows me to easily move the layout when moving time comes; it will also allow for easier layout expansion once I have a house with a layout room. A little forethought now will hopefully suppress future tears.
It’s also important to note that the full 12ft of layout will allow me model the village with almost no compression at all aside from the neglecting of the curve of the track. There is one small potato warehouse that will be slightly cut off of the layouts edge. This provides an interesting opportunity to model the building as a cross-section. From behind the building, you’ll be able to see directly inside to a potato filled warehouse. From the front, all you’ll see is the exterior.
Taylor Main had previously offered me his help in anything benchwork related, so this past Saturday I took him up on that. We met and Kent, picked up the supplies needed, headed back to his basement workshop and got to work.
We made great progress- all that remains to be completed is the legs and the installation of 1″ foam. The foam will be recessed level with the top of the modules. We’ve made plans to complete the modules this coming Sunday.
Congrats on getting started! I remember the thrill of fresh benchwork – it’s one of the best feelings in the hobby.
– Trevor (Port Rowan in 1:64)
LikeLiked by 1 person